PRO-MAX 36 SPECIFICATIONS |
| DESCRIPTION |
PM 36 (36') |
Cutting Width |
36 Feet |
| Cutting Height |
3/4" to 5" - 3/8" steps
Easy to use spacer bushing allow adjustment. |
Transport - Width
- Height (Folded)
- Length |
13 Feet
13 Feet
Pro-Max only 13' 2"
With TD92 attached 29' 8" |
| Ground Clearance |
8" |
| Weight |
4600 Pounds |
Tongue Weight
- Transporting
- Mowing |
1440 Pounds
700 Pounds |
| Ground Pressure |
7 Pounds per square inch |
| Recommended HP |
80 Min. - 110 Max. PTO
or 64% more than currently used on TD92 |
Mowing Capacity
- 2 MPH
- 4 MPH
- 6 MPH
-7.5 MPH |
Acres Per Hour
9
17
26
32 |
| 360 Degree Turn |
0" Uncut Circle |
| Hydraulics |
Requires 2 double acting remotes. All hoses supplied to tractor. Tractor must have hydraulic float position. |
| Number of Spindles |
6 spindles
Heavy duty spindles are each carried in 2 greaseable ball bearings housed in a precision machined hub. |
| Blade Support |
3/4" x 2 1/2" x 11-1/2" long bar welded to spindle and machined. 1/2" bolts hold blade rigid to provide a clean, level cut. |
| Blades |
High lift, heat treated, alloy steel blades
5/16" x 2-1/2" x 32"- 3 per deck.
Optional: Low Lift Blades |
| Number of Tires |
Pro-Max ...2 road wheels, 8 deck wheels Total System ...4 road wheels, 18 deck wheels |
| Deck Tires |
8 - 18 x 9.5 x 8 NHS, 4 ply pneumatic tires mounted on 5 bolt wheels. All hubs and caster pivot bushings are replaceable and greaseable. |
| Transport Tires |
2 - P275/60SR 15" automotive radials. |
| Axles |
Two specially designed castors with 6000 lb. rating for transport wheels. |
| Wheels |
6 bolt with 6" bolt circle. |
| Deck Construction |
A single PC 3/16" steel plate formed and welded with supporting members at high stress areas to achieve maximum structural strength. Deck is 5" deep. |
| Deck Flexibility |
25° up 15° down, 12° front to back |
| Deck Drive |
PTO shaft to right angle gear box driving. 2-"B" section belts to 3 heavy duty spindles. |
| Belt Adjustment |
Easily made by loosening four bolts at gear box base and adjusting the slide plate forward or backward and retightening. |
| Main Gear Box |
4 shaft gear box with 1 3/8" - 6 spline shafts. |
| PTO Shafts |
Telescoping, agricultural PTO drive shafts with proper safety shields 1-3/8" - 6 spline quick disconnect yokes on both ends with ring lock collars.
Input PTO ...Category # 9
Deck PTO ...Category # 4 |
| Cylinders |
2 - Wing lift cylinders - 3.5" by 24" |
| Frame |
Hollow structural steel tubing with supports at high stress areas to achieve maximum strength. |
| Screw Jack |
5000 lb. top-wind jack for easy hook-up. |
| Paint Finish |
Electro-statically applied paint with oven baked finish. |
